https://wiki.icop.com.tw/product//index.php?action=history&feed=atom&title=EBOX-IMX8MM-EthernetEBOX-IMX8MM-Ethernet - Revision history2026-04-21T08:03:52ZRevision history for this page on the wikiMediaWiki 1.34.2https://wiki.icop.com.tw/product/index.php?title=EBOX-IMX8MM-Ethernet&diff=1428&oldid=prevEveshih0725: Created page with "=ETHNET testing= Use the PING command to test the network connections. <pre> # ping -c 10 www.google.com </pre> iPerf3 network bandwidth test. Normally, when testing the netwo..."2021-02-08T02:20:32Z<p>Created page with "=ETHNET testing= Use the PING command to test the network connections. <pre> # ping -c 10 www.google.com </pre> iPerf3 network bandwidth test. Normally, when testing the netwo..."</p>
<p><b>New page</b></p><div>=ETHNET testing=<br />
Use the PING command to test the network connections.<br />
<pre><br />
# ping -c 10 www.google.com<br />
</pre><br />
iPerf3 network bandwidth test.<br />
Normally, when testing the network by iPerf3, you’ll need to prepare a server-side and client-side and work the iPerf3 simultaneously. <br />
<br />
Firstly, start iPerf3 up in the server-side.<br />
<br />
<nowiki>#</nowiki>Server-side<br />
<pre><br />
# iperf3 -s<br />
</pre><br />
Secondly start iPerf3 up in the client-side.<br />
<br />
<nowiki>#</nowiki>Client-side<br />
<pre><br />
# iperf3 -c SERVER IP<br />
</pre>The SERVER_IP in the Client-side should be set at the server-side’s IP or device name. <br />
<br />
When iPerf3 is testing, both server-side and client-side will display the data. The testing result will be as the image below.<br />
<br />
[[File:ETHNET testing.png|frameless|500x500px]]</div>Eveshih0725