PCI7600G LTE module setting: Difference between revisions
From ICOP tech wiki
Created page with "=Recipe for building Yocto Linux for EBOX-IMX8MM= __FORCETOC__ <br /> '''Recipe for building Yocto Linux for EBOX-IMX8MM:''' https://ftp.icop.com.tw/share/q9dqbQS0 '''Che..." |
No edit summary |
||
| (4 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
= | =SIMCom SIM7600G MINI PCIE LTE Module driver setting under Yocto 2.5= | ||
__FORCETOC__ | __FORCETOC__ | ||
==<big>Procedure</big>== | ==<big>Procedure</big>== | ||
'''Step 1.''' | '''Step 1.''' Installing USB serial driver | ||
Essential Yocto Project host packages: | Essential Yocto Project host packages: | ||
<pre> | <pre> | ||
- < > USB Serial Converter Support --- > | |||
- [ ] USB Generic Serial Driver | |||
- < > USB driver for GSM and CDMA modems | |||
< | |||
+ <*> USB Serial Converter Support --- > | |||
+ [*] USB Generic Serial Driver | |||
+ <*> USB driver for GSM and CDMA modems | |||
</pre> | </pre> | ||
Revise the content in kernel/drivers/usb/serial/option.c<pre> | |||
/* SIM7600 */ | |||
<pre> | #define SIMCOM_SIM7600_VID 0x1E0E | ||
#define SIMCOM_SIM7600_PID 0x9001 | |||
</pre> | </pre> | ||
Add the content below to option-ids list<pre> | |||
{ USB_DEVICE(SIMCOM_SIM7600_VID, SIMCOM_SIM7600_PID)}, /*SIM7600 */ | |||
<pre> | |||
</pre> | </pre> | ||
Add the content below to option_probe<pre> | |||
/* SIM7600 */ | |||
<pre> | if (serial->dev->descriptor.idVendor == SIMCOM_SIM7600_VID && | ||
serial->dev->descriptor.idProduct == SIMCOM_SIM7600_PID && | |||
serial->interface->cur_altsetting->desc.bInterfaceNumber == 5 ) | |||
return -ENODEV; | |||
</pre> | </pre> | ||
Execute the command below and there will have 5 different devices: | |||
''' | '''ttyUSB0 ttyUSB1 ttyUSB2 ttyUSB3 ttyUSB4'''<pre> | ||
-C compile linux-imx && bitbake fsl-image-qt5-validation-imx | |||
<pre> | |||
</pre> | </pre> | ||
'''Step 2.''' Mounting the sim7600g.ko driver | |||
#Unzip the sim7600g.zip(https://ftp.icop.com.tw/share/iDBN_fy-) to /BSP/source/poke/recipe-core/ | |||
#Edit BSP/source/poky/meta-poky/conf/layer.conf | |||
#Add MACHINE_ESSENTIAL_EXTRA_RRECOMMENDS += “sim7600g” | |||
#Execute bitbake -C compile linux-imx && bitbake fsl-image-qt5-validation-imx | |||
#After the command execute, you will see wwan0 from command ifconfig -a | |||
'''Step 3.''' Testing SIM7600G (Will return an ok if succeed. | |||
#Plugin SIM7600G before booting up the board. | |||
#Open the terminal and enter minicom -d /dev/ttyUSB2. | |||
( | #Enter at (Ensuring the AT testing command); it will return an ok if it’s working. | ||
#Enter at+cpin? (Checking the status of the SIM card); it will return a “READY” if it’s working, and if return +CME ERROR: SIM not inserted means the SIM card is not plugged in. | |||
#Enter at+csq (Checking the strength of the signal, and the antenna should be installed on the MAIN of SIM7600G); If it returns +CSQ: 0~31.99 means it’s normal, and 99.99 means it’s an error. | |||
#Enter at+cops? (Checking the telecom) | |||
#Enter at+cpsi? ( Checking UE system data ) | |||
#Enter at+cmgs=“+8869xxxxxxxx”(Phone number), and it will return >; enter some content like “testing” and press ctrl+z to send it out. You will receive the message on your phone. | |||
#Using a phone and dial the number the sim card you used in SIM7600G, and if the minicom shows RING means the testing passed. | |||
#Open another terminal and enter echo “at\$qcrmcall=1,1” > /dev/ttyUSB3, and the minicom will return $QCRMCALL:1,V4 | |||
#Enter ifconfig wwan0 up | |||
#Enter udhcpc -i wwan0 | |||
#Enter ping 8.8.8.8 -c 5 to test 4G internet. | |||
Latest revision as of 05:01, 30 March 2022
SIMCom SIM7600G MINI PCIE LTE Module driver setting under Yocto 2.5
Procedure
Step 1. Installing USB serial driver
Essential Yocto Project host packages:
- < > USB Serial Converter Support --- >
- [ ] USB Generic Serial Driver
- < > USB driver for GSM and CDMA modems
+ <*> USB Serial Converter Support --- >
+ [*] USB Generic Serial Driver
+ <*> USB driver for GSM and CDMA modems
Revise the content in kernel/drivers/usb/serial/option.c
/* SIM7600 */
#define SIMCOM_SIM7600_VID 0x1E0E
#define SIMCOM_SIM7600_PID 0x9001
Add the content below to option-ids list
{ USB_DEVICE(SIMCOM_SIM7600_VID, SIMCOM_SIM7600_PID)}, /*SIM7600 */
Add the content below to option_probe
/* SIM7600 */
if (serial->dev->descriptor.idVendor == SIMCOM_SIM7600_VID &&
serial->dev->descriptor.idProduct == SIMCOM_SIM7600_PID &&
serial->interface->cur_altsetting->desc.bInterfaceNumber == 5 )
return -ENODEV;
Execute the command below and there will have 5 different devices:
ttyUSB0 ttyUSB1 ttyUSB2 ttyUSB3 ttyUSB4
-C compile linux-imx && bitbake fsl-image-qt5-validation-imx
Step 2. Mounting the sim7600g.ko driver
- Unzip the sim7600g.zip(https://ftp.icop.com.tw/share/iDBN_fy-) to /BSP/source/poke/recipe-core/
- Edit BSP/source/poky/meta-poky/conf/layer.conf
- Add MACHINE_ESSENTIAL_EXTRA_RRECOMMENDS += “sim7600g”
- Execute bitbake -C compile linux-imx && bitbake fsl-image-qt5-validation-imx
- After the command execute, you will see wwan0 from command ifconfig -a
Step 3. Testing SIM7600G (Will return an ok if succeed.
- Plugin SIM7600G before booting up the board.
- Open the terminal and enter minicom -d /dev/ttyUSB2.
- Enter at (Ensuring the AT testing command); it will return an ok if it’s working.
- Enter at+cpin? (Checking the status of the SIM card); it will return a “READY” if it’s working, and if return +CME ERROR: SIM not inserted means the SIM card is not plugged in.
- Enter at+csq (Checking the strength of the signal, and the antenna should be installed on the MAIN of SIM7600G); If it returns +CSQ: 0~31.99 means it’s normal, and 99.99 means it’s an error.
- Enter at+cops? (Checking the telecom)
- Enter at+cpsi? ( Checking UE system data )
- Enter at+cmgs=“+8869xxxxxxxx”(Phone number), and it will return >; enter some content like “testing” and press ctrl+z to send it out. You will receive the message on your phone.
- Using a phone and dial the number the sim card you used in SIM7600G, and if the minicom shows RING means the testing passed.
- Open another terminal and enter echo “at\$qcrmcall=1,1” > /dev/ttyUSB3, and the minicom will return $QCRMCALL:1,V4
- Enter ifconfig wwan0 up
- Enter udhcpc -i wwan0
- Enter ping 8.8.8.8 -c 5 to test 4G internet.