Difference between revisions of "Recipe for building Yocto3.3 Linux for EBOX-IMX8MM"
From ICOP tech wiki
(Created page with "<br /> =Recipe for building Yocto 3.0 Linux for EBOX-IMX8MM= <br /> '''Recipe for building Yocto Linux for EBOX-IMX8MM''' *https://ftp.icop.com.tw/share/m3LwCPT9 '''Check...") |
|||
(9 intermediate revisions by the same user not shown) | |||
Line 1: | Line 1: | ||
− | + | =Recipe for building Yocto 3.3 Linux for EBOX-IMX8MM= | |
− | =Recipe for building Yocto 3. | ||
<br /> | <br /> | ||
'''Recipe for building Yocto Linux for EBOX-IMX8MM''' | '''Recipe for building Yocto Linux for EBOX-IMX8MM''' | ||
− | *https://ftp.icop.com.tw/share/ | + | *https://ftp.icop.com.tw/share/UsXqkTWk |
'''Check the compiling method on the open document form NXP:''' | '''Check the compiling method on the open document form NXP:''' | ||
− | *https:// | + | *https://ftp.icop.com.tw/share/EDTb66OF<br /> <br /> |
<big>'''Suggest O/S''':Ubuntu 18.04 or later.</big> | <big>'''Suggest O/S''':Ubuntu 18.04 or later.</big> | ||
Line 19: | Line 18: | ||
</pre><big>'''Storage:''' Please make sure the capacity of your storage has 300GB or bigger space.</big> | </pre><big>'''Storage:''' Please make sure the capacity of your storage has 300GB or bigger space.</big> | ||
<big>'''RAM:''' Please make sure the physical memory + swap has 16GB or bigger capacity.</big><br /> | <big>'''RAM:''' Please make sure the physical memory + swap has 16GB or bigger capacity.</big><br /> | ||
− | == | + | ==Procedure== |
'''Step 1.''' Install Host packages: | '''Step 1.''' Install Host packages: | ||
Essential Yocto Project host packages: | Essential Yocto Project host packages: | ||
<pre> | <pre> | ||
− | $ sudo apt-get install gawk wget git-core diffstat unzip texinfo gcc-multilib | + | $ sudo apt-get install gawk wget git-core diffstat \ |
− | build-essential chrpath socat libsdl1.2-dev | + | unzip texinfo gcc-multilib build-essential chrpath socat cpio \ |
+ | python python3 python3-pip python3-pexpect xz-utils debianutils \ | ||
+ | iputils-ping python3-git python3-jinja2 libegl1-mesa libsdl1.2-dev \ pylint3 xterm | ||
</pre> | </pre> | ||
Line 63: | Line 64: | ||
$ mkdir imx-yocto-bsp | $ mkdir imx-yocto-bsp | ||
$ cd imx-yocto-bsp | $ cd imx-yocto-bsp | ||
− | $ repo init -u https:// | + | $ repo init -u https://github.com/nxp-imx/imx-manifest -b imx-linux-Hardknott -m imx-5.10.72-2.2.1.xml |
$ repo sync | $ repo sync | ||
</pre> | </pre> | ||
Line 86: | Line 87: | ||
expand-rootfs \ | expand-rootfs \ | ||
linux-firmware \ | linux-firmware \ | ||
+ | pciutils \ | ||
" | " | ||
</pre> | </pre> | ||
Line 105: | Line 107: | ||
=How to install the image file by UUU.= | =How to install the image file by UUU.= | ||
+ | |||
After implemented bitbake imx-image-full, it will generate an image file and be stored in the file under build-dmp/tmp/deploy/images/dm395e. | After implemented bitbake imx-image-full, it will generate an image file and be stored in the file under build-dmp/tmp/deploy/images/dm395e. | ||
Line 112: | Line 115: | ||
</pre> | </pre> | ||
Input command to get the image file - imx-image-full-dm395e.wic (In this file, there are packaged kernel and rootfs):<pre> | Input command to get the image file - imx-image-full-dm395e.wic (In this file, there are packaged kernel and rootfs):<pre> | ||
− | $ bzip2 -d imx-image-full-dm395e.wic</pre>Download the UUU.auto sample:https://ftp.icop.com.tw/share/- | + | $ bzip2 -d imx-image-full-dm395e.wic</pre>Download the UUU.auto sample:https://ftp.icop.com.tw/share/6oK-EhMl<br>UUU application under Linux:https://github.com/NXPmicro/mfgtools/releases<br /><pre> |
− | <br>UUU application under Linux:https://github.com/NXPmicro/mfgtools/releases<br /><pre> | ||
SDP: boot -f imx-boot-dm395e-sd.bin-flash_evk | SDP: boot -f imx-boot-dm395e-sd.bin-flash_evk |
Latest revision as of 10:46, 24 May 2023
Recipe for building Yocto 3.3 Linux for EBOX-IMX8MM
Recipe for building Yocto Linux for EBOX-IMX8MM
Check the compiling method on the open document form NXP:
Suggest O/S:Ubuntu 18.04 or later.
Please comment out content to the local.conf to avoid the error during building the SDL.
#PACKAGECONFIG_append_pn-qemu-native = " sdl" #PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl"
Storage: Please make sure the capacity of your storage has 300GB or bigger space.
RAM: Please make sure the physical memory + swap has 16GB or bigger capacity.
Procedure
Step 1. Install Host packages:
Essential Yocto Project host packages:
$ sudo apt-get install gawk wget git-core diffstat \ unzip texinfo gcc-multilib build-essential chrpath socat cpio \ python python3 python3-pip python3-pexpect xz-utils debianutils \ iputils-ping python3-git python3-jinja2 libegl1-mesa libsdl1.2-dev \ pylint3 xterm
i.MX layers host packages for a Ubuntu 12.04 or 14.04 host setup are:
$ sudo apt-get install libsdl1.2-dev xterm sed cvs subversion coreutils texi2html \ docbook-utils python-pysqlite2 help2man make gcc g++ desktop-file-utils \ libgl1-mesa-dev libglu1-mesa-dev mercurial autoconf automake groff curl lzop asciidoc
Step 2. Insalling the repo utility:
Create the bin folder in the home directory:
$ mkdir ~/bin (this step may not be needed if the bin folder already exists) $ curl https://storage.googleapis.com/git-repo-downloads/repo > ~/bin/repo $ chmod a+x ~/bin/repo
Step 3. Add the following line to the .bashrc file to make sure the ~/bin folder is in the PATH.
export PATH=~/bin:$PATH
Step 4. Ensure the git is properly set up by commands below:
$ git config --global user.name "Your Name" $ git config --global user.email "Your Email" $ git config --list
Step 5. Download the i.MX Yocto Project Community BSP recipe layers:
$ mkdir imx-yocto-bsp $ cd imx-yocto-bsp $ repo init -u https://github.com/nxp-imx/imx-manifest -b imx-linux-Hardknott -m imx-5.10.72-2.2.1.xml $ repo sync
Step 6. Unzip the Recipe for building Yocto Linux for EBOX-IMX8MM to the file ‘imx-yocto-bsp”
Step 7. Create the setup environment by command below (You could change the file name as you want)
$ DISTRO=fsl-imx-xwayland MACHINE=dm395e source imx-setup-release.sh -b build-dmp
Please input “y” when the EULA confirmation pop out.
Step 8. Edit conf/local.conf file and add the content below at the bottom:
CORE_IMAGE_EXTRA_INSTALL += "chromium-ozone-wayland" IMAGE_INSTALL_append += " \ expand-rootfs \ linux-firmware \ pciutils \ "
Step 9. Edit conf/bblayers.conf file and add the content below at the bottom:
BBLAYERS += " ${BSPDIR}/sources/meta-custom-dmp "
Step 10. Run the command below.
$ bitbake imx-image-full
The system will start to download and install source code, patch file, and compilation
How to install the image file by UUU.
After implemented bitbake imx-image-full, it will generate an image file and be stored in the file under build-dmp/tmp/deploy/images/dm395e.
In the build-dmp/tmp/deploy/images/dm395e file, we’ll need the file below for the image restoration.
1. imx-image-full-dm395e.wic 2. imx-boot-dm395e-sd.bin-flash_evk
Input command to get the image file - imx-image-full-dm395e.wic (In this file, there are packaged kernel and rootfs):
$ bzip2 -d imx-image-full-dm395e.wic
Download the UUU.auto sample:https://ftp.icop.com.tw/share/6oK-EhMl
UUU application under Linux:https://github.com/NXPmicro/mfgtools/releases
SDP: boot -f imx-boot-dm395e-sd.bin-flash_evk
- This command will be run when use SPL
SDPU: delay 1000 SDPU: write -f imx-boot-dm395e-sd.bin-flash_evk -offset 0x57c00 SDPU: jump
- This command will be run when ROM support stream mode
SDPS: boot -f imx-boot-dm395e-sd.bin-flash_evk
- These commands will be run when use SPL and will be skipped if no spl
- if (SPL support SDPV)
SDPV: delay 1000 SDPV: write -f imx-boot-dm395e-sd.bin-flash_evk -skipspl SDPV: jump
FB: ucmd setenv fastboot_dev mmc FB: ucmd setenv mmcdev 2 FB: ucmd mmc dev 2 0 FB: flash -raw2sparse all imx-image-full-dm395e.wic FB: flash bootloader imx-boot-dm395e-sd.bin-flash_evk FB: ucmd if env exists emmc_ack; then ; else setenv emmc_ack 0; fi; FB: ucmd mmc partconf 2 ${emmc_ack} 1 0 FB: done
After you have set your own file name, you could input the command below to install the Yocto Linux
uuu uuu.auto