Difference between revisions of "How to Restore Android9 OS to the eMMC on EBOX-IMX8MM"
From ICOP tech wiki
Line 18: | Line 18: | ||
*Find the SW1 on the EBOX-IMX8MM and change the setting to Serial Download Mode according to the photo below: | *Find the SW1 on the EBOX-IMX8MM and change the setting to Serial Download Mode according to the photo below: | ||
− | [[File: | + | [[File:EBOX-IMX8MM SW.jpg|alt=|frameless|800x800px|link=http://192.168.9.24/product/index.php/File:EBOX-IMX8MM_SW.jpg]] |
*Turn on the host PC and unzip the image file in it. | *Turn on the host PC and unzip the image file in it. | ||
Line 33: | Line 33: | ||
*Remove the USB to Micro USB cable on the EBOX-IMX8MM (Power off), and set the SW1 to Internal boot as below. | *Remove the USB to Micro USB cable on the EBOX-IMX8MM (Power off), and set the SW1 to Internal boot as below. | ||
− | [[File: | + | [[File:EBOX-IMX8MM SW2.jpg|alt=|frameless|800x800px|link=http://192.168.9.24/product/index.php/File:EBOX-IMX8MM_SW2.jpg]] |
*Power on the EBOX-IMX8MM and you can see the Android9 booting. | *Power on the EBOX-IMX8MM and you can see the Android9 booting. | ||
Line 55: | Line 55: | ||
*Find the SW1 on the EBOX-IMX8MM and change the setting to Serial Download Mode according to the photo below: | *Find the SW1 on the EBOX-IMX8MM and change the setting to Serial Download Mode according to the photo below: | ||
− | [[File: | + | [[File:EBOX-IMX8MM SW.jpg|alt=|frameless|800x800px|link=http://192.168.9.24/product/index.php/File:EBOX-IMX8MM_SW.jpg]] |
*Turn on the host PC and unzip the image file to it. | *Turn on the host PC and unzip the image file to it. | ||
Line 70: | Line 70: | ||
*Remove the USB to Micro USB cable on the EBOX-IMX8MM (Power off), and set the SW1 to Internal boot as below. | *Remove the USB to Micro USB cable on the EBOX-IMX8MM (Power off), and set the SW1 to Internal boot as below. | ||
− | [[File: | + | [[File:EBOX-IMX8MM SW2.jpg|alt=|frameless|800x800px|link=http://192.168.9.24/product/index.php/File:EBOX-IMX8MM_SW2.jpg]] |
*Power on the EBOX-IMX8MM and you can see the Yocto Linux booting. | *Power on the EBOX-IMX8MM and you can see the Yocto Linux booting. | ||
[[File:1.2.9.png|frameless|560x560px]] | [[File:1.2.9.png|frameless|560x560px]] |
Revision as of 11:38, 9 February 2022
Restore the Android9 OS via Linux host PC to the EBOX-IMX8MM
Contents
Restore the Android9 OS via Linux host PC to the EBOX-IMX8MM
Tools you need before restoring the image to the eMMC:
- EBOX-IMX8MM 2GB RAM image with the UUU burning software:https://ftp.icop.com.tw/share/Xhn7MJoB
- EBOX-IMX8MM 4GB RAM image with the UUU burning software:https://ftp.icop.com.tw/share/g0DkVbaB
- A 64-bit Linux host O/S on a PC (The virtual machine is not suggested to be used)\
- USB cable to connect between the host PC and the EBOX-IMX8MM. (Ex: USB to micro USB)
Write the image to the eMMC on the EBOX-IMX8MM.
- This section will introduce how to write the image to the eMMC on the EBOX-IMX8MM step by step.
- Find the SW1 on the EBOX-IMX8MM and change the setting to Serial Download Mode according to the photo below:
- Turn on the host PC and unzip the image file in it.
- Connect the USB to micro USB to the host PC, but not connect to the EBOX-IMX8MM.
- Open a terminal on the host PC and access the location you’ve put the image file and input “sudo ./uuu_imx_android_flash.sh -f imx8mm -a -e” ; you will see “Wait for known USB Device Appear
- Connect the Micro USB to the EBOX-IMX8MM, and it will trigger the serial download mode to restore the image from the host PC.
- After the restore process is done, it will show on the host PC as the image below:
- Remove the USB to Micro USB cable on the EBOX-IMX8MM (Power off), and set the SW1 to Internal boot as below.
- Power on the EBOX-IMX8MM and you can see the Android9 booting.
Restore the Android9 OS via Win10 host PC to the EBOX-IMX8MM
Tools you need before restoring the image to the eMMC:
- EBOX-IMX8MM 2GB RAM image with the UUU burning software:https://ftp.icop.com.tw/share/Xhn7MJoB
- EBOX-IMX8MM 4GB RAM image with the UUU burning software:https://ftp.icop.com.tw/share/g0DkVbaB
- A Windows 10 host O/S on a PC (The virtual machine is not suggested to be used)
- USB cable to connect between the host PC and the EBOX-IMX8MM. (Ex: USB to micro USB)
Write the image to the eMMC on the EBOX-IMX8MM.
This section will introduce how to write the image to the eMMC on the EBOX-IMX8MM step by step.
- Find the SW1 on the EBOX-IMX8MM and change the setting to Serial Download Mode according to the photo below:
- Turn on the host PC and unzip the image file to it.
- Connect the USB to micro USB cable to the host PC, but not connect to EBOX-IMX8MM.
- Open a terminal with administration right on the host PC and access the location you’ve put the image file and input “uuu_imx_android_flash.bat -f imx8mm -a -e” , and you will see “Wait for known USB Device Appear”.
- Connect the Micro USB to the EBOX-IMX8MM, and it will trigger the serial download mode to restore the image from the host PC.
- After the restore process is done, it will show on the host PC as the image below:
- Remove the USB to Micro USB cable on the EBOX-IMX8MM (Power off), and set the SW1 to Internal boot as below.
- Power on the EBOX-IMX8MM and you can see the Yocto Linux booting.