|
|
| Line 5: |
Line 5: |
| | {{DocImage|category1={{#var:HARDWARE_NAME}}|category2=Yocto|}}{{:Recovery_SD_card_general}} | | {{DocImage|category1={{#var:HARDWARE_NAME}}|category2=Yocto|}}{{:Recovery_SD_card_general}} |
| | | | |
| − | ==Restore the Yocto Linux via Win10 host PC to the EBOX-IMX8MM==
| + | <br /> |
| − | | |
| − | | |
| − | ===Tools you need before restoring the image to the eMMC:===
| |
| − | | |
| − | *Recovery image with the UUU burning software:
| |
| − | **1GB RAM version: <br />ftp://sbc:sbc@ftp.icop.com.tw/iMX8/OS/Yocto/Demo%20image/EB-IMX8MM1G.zip
| |
| − | **2GB RAM version: <br />ftp://sbc:sbc@ftp.icop.com.tw/iMX8/OS/Yocto/Demo%20image/EB-IMX8MM2G.zip
| |
| − | | |
| − | A Windows 10 host O/S on a PC (The virtual machine is not suggested to be used)
| |
| − | | |
| − | *USB cable to connect between the host PC and EBOX-IMX8MM.
| |
| − | | |
| − | (Ex: USB to micro USB)
| |
| − | | |
| − | *Cable for the console to connect between the host PC and the EBOX-IMX8MM.
| |
| − | | |
| − | (Ex: USB to RS-232)
| |
| − | | |
| − | ===Write the image to the eMMC on the EBOX-IMX8MM.===
| |
| − | | |
| − | This section will introduce how to write the image to the eMMC on the EBOX-IMX8MM step by step.
| |
| − | | |
| − | *Find the SW1 on the EBOX-IMX8MM and change the setting to Serial Download Mode according to the photo below: <br />[[File:1-2-2.png|frameless]]
| |
| − | *Turn on the host PC and unzip the image file to it.
| |
| − | *Connect the host PC and the EBOX-IMX8MM via console cable. (In this case, the console function on the EBOX-IMX8MM is on COM2.)
| |
| − | *Connect the USB to micro USB cable to the host PC, but not connect to EBOX-IMX8MM.
| |
| − | *Open the PUTTY on the host PC and set the Serial line at the correct location. You could find the location under device manager. <br />[[File:2-2-5-1.png|frameless|400x400px]][[File:2-2-5-2.png|frameless|400x400px]] <br />If there is no PUTTY on the host PC, please download it on the PUTTY’s website: https://www.putty.org/
| |
| − | *After connected to the PUTTY, you could monitor the restore process on the EBOX-IMX8MM.
| |
| − | *Open a terminal on the host PC and access the location you’ve put the image file and input “uuu.exe uuu.auto” , and you will see “Wait for known USB Device Appear”. <br />[[File:2-2-7.png|frameless|500x500px]]
| |
| − | *Connect the Micro USB to the EBOX-IMX8MM, and it will trigger the serial download mode to restore the image from the host PC.
| |
| − | *After the restore process is done, it will show on the host PC as the image below: <br />[[File:2-2-9.png|frameless|500x500px]]
| |
| − | *Remove the USB to Micro USB cable on the EBOX-IMX8MM (Power off), and set the SW1 to Internal boot as below. <br />[[File:1-2-10.png|frameless]]
| |
| − | *Power on the EBOX-IMX8MM and you can see the Yocto Linux booting. <br />[[File:1-2-11.png|frameless|500x500px]]
| |
| − | *If you press any key while booting up, we will access the U-boot mode. <br />[[File:1-2-12.png|frameless|400x400px]]
| |
