Difference between revisions of "How to Restore Yocto Linux to the eMMC on EBOX-IMX8MM"
From ICOP tech wiki
| Line 17: | Line 17: | ||
*Find the SW1 on the EBOX-IMX8MM and change the setting to Serial Download Mode according to the photo below: | *Find the SW1 on the EBOX-IMX8MM and change the setting to Serial Download Mode according to the photo below: | ||
| − | [[File: | + | [[File:EBOX-IMX8MM SW.jpg|alt=|frameless|800x800px]] |
*Turn on the host PC and unzip the image file in it. | *Turn on the host PC and unzip the image file in it. | ||
| Line 32: | Line 32: | ||
*Remove the USB to Micro USB cable on the EBOX-IMX8MM (Power off), and set the SW1 to Internal boot as below. | *Remove the USB to Micro USB cable on the EBOX-IMX8MM (Power off), and set the SW1 to Internal boot as below. | ||
| − | [[File: | + | [[File:EBOX-IMX8MM SW2.jpg|alt=|frameless|800x800px]] |
*Power on the EBOX-IMX8MM and you can see the Yocto Linux booting. | *Power on the EBOX-IMX8MM and you can see the Yocto Linux booting. | ||
| Line 56: | Line 56: | ||
*Find the SW1 on the EBOX-IMX8MM and change the setting to Serial Download Mode according to the photo below: | *Find the SW1 on the EBOX-IMX8MM and change the setting to Serial Download Mode according to the photo below: | ||
| − | [[File: | + | [[File:EBOX-IMX8MM SW.jpg|alt=|frameless|800x800px]] |
*Turn on the host PC and unzip the image file to it. | *Turn on the host PC and unzip the image file to it. | ||
| Line 71: | Line 71: | ||
*Remove the USB to Micro USB cable on the EBOX-IMX8MM (Power off), and set the SW1 to Internal boot as below. | *Remove the USB to Micro USB cable on the EBOX-IMX8MM (Power off), and set the SW1 to Internal boot as below. | ||
| − | [[File: | + | [[File:EBOX-IMX8MM SW2.jpg|alt=|frameless|800x800px]] |
*Power on the EBOX-IMX8MM and you can see the Yocto Linux booting. | *Power on the EBOX-IMX8MM and you can see the Yocto Linux booting. | ||
Revision as of 11:37, 9 February 2022
How to Restore Yocto Linux to the eMMC on EBOX-IMX8MM
Contents
Restore the Yocto Linux via Linux host PC to the EBOX-IMX8MM
Tools you need before restoring the image to the eMMC:
- Recovery image with the UUU burning software:
- 1GB RAM version:https://ftp.icop.com.tw/share/2GvMy6ic
- 2GB RAM version:https://ftp.icop.com.tw/share/2HF14mBX
- A 64-bit Linux host O/S on a PC (The virtual machine is not suggested to be used)
- USB cable to connect between the host PC and the EBOX-IMX8MM. (Ex: USB to micro USB)
Write the image to the eMMC on the EBOX-IMX8MM.
- This section will introduce how to write the image to the eMMC on the EBOX-IMX8MM step by step.
- Find the SW1 on the EBOX-IMX8MM and change the setting to Serial Download Mode according to the photo below:
- Turn on the host PC and unzip the image file in it.
- Connect the USB to micro USB to the host PC, but not connect to the EBOX-IMX8MM.
- Open a terminal on the host PC and access the location you’ve put the image file and input “sudo ./uuu uuu.auto” ; you will see “Wait for known USB Device Appear”
- Connect the Micro USB to the EBOX-IMX8MM, and it will trigger the serial download mode to restore the image from the host PC.
- After the restore process is done, it will show on the host PC as the image below:
- Remove the USB to Micro USB cable on the EBOX-IMX8MM (Power off), and set the SW1 to Internal boot as below.
- Power on the EBOX-IMX8MM and you can see the Yocto Linux booting.
Restore the Yocto Linux via Win10 host PC to the EBOX-IMX8MM.
Tools you need before restoring the image to the eMMC:
- Recovery image with the UUU burning software:
- 1GB RAM version:https://ftp.icop.com.tw/share/2GvMy6ic
- 2GB RAM version:https://ftp.icop.com.tw/share/2HF14mBX
- A Windows 10 host O/S on a PC (The virtual machine is not suggested to be used)
- USB cable to connect between the host PC and EBOX-IMX8MM.(Ex: USB to micro USB)
Write the image to the eMMC on the EBOX-IMX8MM.
This section will introduce how to write the image to the eMMC on the EBOX-IMX8MM step by step.
- Find the SW1 on the EBOX-IMX8MM and change the setting to Serial Download Mode according to the photo below:
- Turn on the host PC and unzip the image file to it.
- Connect the USB to micro USB cable to the host PC, but not connect to EBOX-IMX8MM.
- Open a terminal on the host PC and access the location you’ve put the image file and input “uuu.exe uuu.auto” , and you will see “Wait for known USB Device Appear”.
- Connect the Micro USB to the EBOX-IMX8MM, and it will trigger the serial download mode to restore the image from the host PC.
- After the restore process is done, it will show on the host PC as the image below:
- Remove the USB to Micro USB cable on the EBOX-IMX8MM (Power off), and set the SW1 to Internal boot as below.
- Power on the EBOX-IMX8MM and you can see the Yocto Linux booting.
