View source for How to Restore Yocto Linux to the eMMC on NX8MM-35

{{#vardefine:RELEASE_PARAM|{{#urlget:release}}}} <!--
--> {{#lst:Yocto_Platform_Customization|{{#var:RELEASE_PARAM|RELEASE_MORTY_V1.0_DART-6UL}}}} <!--
--> {{PageHeader|How to Restore Yocto Linux to the eMMC on NX8MM-35}}
==<big>Restore the Yocto Linux via Linux host PC to the NX8MM-35</big>==
===Tools you need before restoring the image to the eMMC:===

*<u>Recovery image</u> with the <u>UUU burning software</u>:
**Display: HDMI
***2GB RAM version:https://ftp.icop.com.tw/share/n3Ao-zi7

*A 64-bit Linux host O/S on a PC (The virtual machine is not suggested to be used)
*USB cable to connect between the host PC and the NX8MM-35.  (Ex: USB to micro USB)

===Write the image to the eMMC on the NX8MM-35.===

*This section will introduce how to write the image to the eMMC on the NX8MM-35 step by step.
*Find the SW1 on the NX8MM-35 and change the setting to Serial Download Mode according to the photo below:

[[File:NX8MM-35 JP.jpg|alt=|frameless|300x300px]]

*Turn on the host PC and unzip the image file in it.
*Connect the USB to micro USB to the host PC, but not connect to the NX8MM-35.
*Open a terminal on the host PC and access the location you’ve put the image file and input "sudo chmod a+x uuu" to enable uuu as executable command.
*Input “sudo ./uuu xxxx.auto” (check the xxxx.auto name in the file) ; you will see “Wait for known USB Device Appear”

[[File:Nx8mm-35 Yocto-1.2.5.png|alt=|frameless|680x680px]]

*Connect the Micro USB to the NX8MM-35, and it will trigger the serial download mode to restore the image from the host PC.
*After the restore process is done, it will show on the host PC as the image below:

[[File:Nx8mm-35Yocto-1.2.7.png|alt=|frameless|680x680px]]

*Remove the USB to Micro USB cable on the NX8MM-35(Power off), and set the SW1 to Internal boot as below.

[[File:NX8MM-35 JP2.jpg|alt=|frameless|300x300px]]

*Power on the NX8MM-35 and you can see the Yocto Linux booting.

[[File:1-2-11.png|frameless|480x480px]]

<br />

==<big>Restore the Yocto Linux via Win10 host PC to the NX8MM-35.</big>==

===Tools you need before restoring the image to the eMMC:===

*<u>Recovery image</u> with the <u>UUU burning software</u>:
**Display: HDMI
***2GB RAM version:https://ftp.icop.com.tw/share/n3Ao-zi7

*A Windows 10 host O/S on a PC (The virtual machine is not suggested to be used)
*USB cable to connect between the host PC and NX8MM-35.(Ex: USB to micro USB)

===Write the image to the eMMC on the NX8MM-35.===
This section will introduce how to write the image to the eMMC on the NX8MM-35 step by step.

*Find the SW1 on the NX8MM-35 and change the setting to Serial Download Mode according to the photo below:

[[File:NX8MM-35 JP.jpg|alt=|frameless|300x300px]]

*Turn on the host PC and unzip the image file to it.
*Connect the USB to micro USB cable to the host PC, but not connect to NX8MM-35.
*Open a terminal on the host PC and access the location you’ve put the image file and input “uuu.exe uuu.auto” , and you will see “Wait for known USB Device Appear”.

[[File:NX8MM YOCTO IMAGE1 windows.jpg|alt=|frameless|690x690px]]

*Connect the Micro USB to the NX8MM-35, and it will trigger the serial download mode to restore the image from the host PC.
*After the restore process is done, it will show on the host PC as the image below:

[[File:NX8MM-35 Yocto IMAGE2 windows.jpg|alt=|frameless|800x800px]]

*Remove the USB to Micro USB cable on the NX8MM-35(Power off), and set the SW1 to Internal boot as below.

[[File:NX8MM-35 JP2.jpg|alt=|frameless|300x300px]]

*Power on the NX8MM-35 and you can see the Yocto Linux booting.

[[File:1-2-11.png|frameless|480x480px]]

<br />

<br />