Personal tools

Difference between revisions of "How to Restore Yocto Linux to the eMMC on NX8MM-35"

From ICOP tech wiki

Jump to: navigation, search
(Created page with "{{#vardefine:RELEASE_PARAM|{{#urlget:release}}}} <!-- --> {{#lst:Yocto_Platform_Customization|{{#var:RELEASE_PARAM|RELEASE_MORTY_V1.0_DART-6UL}}}} <!-- --> {{PageHeader|How to...")
 
Line 1: Line 1:
 
{{#vardefine:RELEASE_PARAM|{{#urlget:release}}}} <!--
 
{{#vardefine:RELEASE_PARAM|{{#urlget:release}}}} <!--
 
--> {{#lst:Yocto_Platform_Customization|{{#var:RELEASE_PARAM|RELEASE_MORTY_V1.0_DART-6UL}}}} <!--
 
--> {{#lst:Yocto_Platform_Customization|{{#var:RELEASE_PARAM|RELEASE_MORTY_V1.0_DART-6UL}}}} <!--
−
--> {{PageHeader|How to Restore Yocto Linux to the eMMC on PN8M-090T}} __toc__
+
--> {{PageHeader|How to Restore Yocto Linux to the eMMC on EBOX-IMX8MM}}
−
 
+
==<big>Restore the Yocto Linux via Linux host PC to the EBOX-IMX8MM</big>==
−
==Restore the Yocto Linux via Linux host PC to the PN8M-090T==
 
 
===Tools you need before restoring the image to the eMMC:===
 
===Tools you need before restoring the image to the eMMC:===
  
 
*<u>Recovery image</u> with the <u>UUU burning software</u>:
 
*<u>Recovery image</u> with the <u>UUU burning software</u>:
−
**PN8M-090T-8A-B5GM-I: https://ftp.icop.com.tw/share/F4oUnz-a
+
**1GB RAM version:https://ftp.icop.com.tw/share/2GvMy6ic
 +
**2GB RAM version:https://ftp.icop.com.tw/share/2HF14mBX
  
 
*A 64-bit Linux host O/S on a PC (The virtual machine is not suggested to be used)
 
*A 64-bit Linux host O/S on a PC (The virtual machine is not suggested to be used)
−
*USB cable CABLE-MINIDIN8P-30 to connect between the host PC and the PN8M-090T.
+
*USB cable to connect between the host PC and the EBOX-IMX8MM. (Ex: USB to micro USB)
  
−
===Write the image to the eMMC on the PN8M-090T===
+
===Write the image to the eMMC on the EBOX-IMX8MM.===
−
This section will introduce how to write the image to the eMMC on the PN8M-090T step by step.
 
  
−
*Find the SW1 and SW2 on the PN8M-090T and change the setting to Serial Download(developer) Mode according to the photo below:
+
*This section will introduce how to write the image to the eMMC on the EBOX-IMX8MM step by step.
 +
*Find the SW1 on the EBOX-IMX8MM and change the setting to Serial Download Mode according to the photo below:
  
−
[[File:Yocto-linux-1.2.1.png|frameless|420x420px]]
+
[[File:EBOX-IMX8MM SW.jpg|alt=|frameless|800x800px]]
  
 
*Turn on the host PC and unzip the image file in it.
 
*Turn on the host PC and unzip the image file in it.
−
*Connect the USB on CABLE-MINIDIN8P-30 to the host PC, but not connect to the PN8M-090T.
+
*Connect the USB to micro USB to the host PC, but not connect to the EBOX-IMX8MM.
−
 
 
−
[[File:Yocto-linux-1.2.3.png|frameless|300x300px]]
 
−
 
 
 
*Open a terminal on the host PC and access the location you’ve put the image file and input “sudo ./uuu uuu.auto” ; you will see “Wait for known USB Device Appear”
 
*Open a terminal on the host PC and access the location you’ve put the image file and input “sudo ./uuu uuu.auto” ; you will see “Wait for known USB Device Appear”
  
 
[[File:Yocto-1.2.5.png|frameless|680x680px]]
 
[[File:Yocto-1.2.5.png|frameless|680x680px]]
  
−
*Connect the CABLE-MINIDIN8P-30 to the PN8M-090T, and it will trigger the serial download mode to restore the image from the host PC.
+
*Connect the Micro USB to the EBOX-IMX8MM, and it will trigger the serial download mode to restore the image from the host PC.
−
 
 
−
[[File:Yocto-linux-1.2.5.png|frameless|560x560px]]
 
−
 
 
 
*After the restore process is done, it will show on the host PC as the image below:
 
*After the restore process is done, it will show on the host PC as the image below:
  
 
[[File:Yocto-1.2.7.png|frameless|680x680px]]
 
[[File:Yocto-1.2.7.png|frameless|680x680px]]
  
−
*Remove the CABLE-MINIDIN8P-30 on the PN8M-090T, and set the SW1 and SW2 as the photo below
+
*Remove the USB to Micro USB cable on the EBOX-IMX8MM (Power off), and set the SW1 to Internal boot as below.
  
−
[[File:Yocto-linux-1.2.7.png|frameless|460x460px]]
+
[[File:EBOX-IMX8MM SW2.jpg|alt=|frameless|800x800px]]
  
−
*Power on the PN8M-090T and you can see the Yocto Linux booting.
+
*Power on the EBOX-IMX8MM and you can see the Yocto Linux booting.
  
 
[[File:1-2-11.png|frameless|480x480px]]
 
[[File:1-2-11.png|frameless|480x480px]]
−
 
−
*If you press any key while booting up, we will access the U-boot mode.
 
−
 
−
[[File:1-2-12.png|frameless|480x480px]]
 
  
 
<br />
 
<br />
  
−
==Restore the Yocto Linux via Win10 host PC to the PN8M-090T==
+
==<big>Restore the Yocto Linux via Win10 host PC to the EBOX-IMX8MM.</big>==
  
 
===Tools you need before restoring the image to the eMMC:===
 
===Tools you need before restoring the image to the eMMC:===
  
−
*'''Recovery image''' with the '''UUU burning software''':
+
*<u>Recovery image</u> with the <u>UUU burning software</u>:
−
**PN8M-090T-8A-B5GM-I:https://ftp.icop.com.tw/share/F4oUnz-a
+
**1GB RAM version:https://ftp.icop.com.tw/share/2GvMy6ic
 +
**2GB RAM version:https://ftp.icop.com.tw/share/2HF14mBX
  
 
*A Windows 10 host O/S on a PC (The virtual machine is not suggested to be used)
 
*A Windows 10 host O/S on a PC (The virtual machine is not suggested to be used)
−
*USB cable CABLE-MINIDIN8P-30 to connect between the host PC and the PN8M-090T.
+
*USB cable to connect between the host PC and EBOX-IMX8MM.(Ex: USB to micro USB)
  
 
===Write the image to the eMMC on the EBOX-IMX8MM.===
 
===Write the image to the eMMC on the EBOX-IMX8MM.===
 
This section will introduce how to write the image to the eMMC on the EBOX-IMX8MM step by step.
 
This section will introduce how to write the image to the eMMC on the EBOX-IMX8MM step by step.
  
−
*Find the SW1 and SW2 on the PN8M-090T and change the setting to Serial Download(developer) Mode according to the photo below:
+
*Find the SW1 on the EBOX-IMX8MM and change the setting to Serial Download Mode according to the photo below:
  
−
[[File:Yocto-linux-1.2.1.png|frameless|420x420px]]
+
[[File:EBOX-IMX8MM SW.jpg|alt=|frameless|800x800px]]
  
 
*Turn on the host PC and unzip the image file to it.
 
*Turn on the host PC and unzip the image file to it.
−
*Connect the USB on CABLE-MINIDIN8P-30 to the host PC, but not connect to the PN8M-090T.
+
*Connect the USB to micro USB cable to the host PC, but not connect to EBOX-IMX8MM.
−
 
 
−
[[File:Yocto-linux-1.2.3.png|frameless|300x300px]]
 
−
 
 
 
*Open a terminal on the host PC and access the location you’ve put the image file and input “uuu.exe uuu.auto” , and you will see “Wait for known USB Device Appear”.
 
*Open a terminal on the host PC and access the location you’ve put the image file and input “uuu.exe uuu.auto” , and you will see “Wait for known USB Device Appear”.
  
 
[[File:Yocto-2.2.4.png|frameless|670x670px]]
 
[[File:Yocto-2.2.4.png|frameless|670x670px]]
  
−
*Connect the CABLE-MINIDIN8P-30 to the PN8M-090T, and it will trigger the serial download mode to restore the image from the host PC.
+
*Connect the Micro USB to the EBOX-IMX8MM, and it will trigger the serial download mode to restore the image from the host PC.
−
 
 
−
[[File:Yocto-linux-1.2.5.png|frameless|560x560px]]
 
−
 
 
 
*After the restore process is done, it will show on the host PC as the image below:
 
*After the restore process is done, it will show on the host PC as the image below:
  
−
[[File:Yocto-2.2.6.png|frameless|690x690px]]  
+
[[File:Yocto-2.2.6.png|frameless|690x690px]]
  
−
*Remove the CABLE-MINIDIN8P-30 on the PN8M-090T, and set the SW1 and SW2 as the photo below
+
*Remove the USB to Micro USB cable on the EBOX-IMX8MM (Power off), and set the SW1 to Internal boot as below.
  
−
[[File:Yocto-linux-1.2.7.png|frameless|460x460px]]
+
[[File:EBOX-IMX8MM SW2.jpg|alt=|frameless|800x800px]]
  
−
*Power on the PN8M-090T and you can see the Yocto Linux booting.
+
*Power on the EBOX-IMX8MM and you can see the Yocto Linux booting.
  
 
[[File:1-2-11.png|frameless|499x499px]]
 
[[File:1-2-11.png|frameless|499x499px]]
  
−
*If you press any key while booting up, we will access the U-boot mode.
+
<br />
−
 
 
−
[[File:Yocto-2.2.9.png|frameless|482x482px]]
 

Revision as of 11:56, 24 February 2022

How to Restore Yocto Linux to the eMMC on EBOX-IMX8MM

Restore the Yocto Linux via Linux host PC to the EBOX-IMX8MM

Tools you need before restoring the image to the eMMC:

  • A 64-bit Linux host O/S on a PC (The virtual machine is not suggested to be used)
  • USB cable to connect between the host PC and the EBOX-IMX8MM. (Ex: USB to micro USB)

Write the image to the eMMC on the EBOX-IMX8MM.

  • This section will introduce how to write the image to the eMMC on the EBOX-IMX8MM step by step.
  • Find the SW1 on the EBOX-IMX8MM and change the setting to Serial Download Mode according to the photo below:

  • Turn on the host PC and unzip the image file in it.
  • Connect the USB to micro USB to the host PC, but not connect to the EBOX-IMX8MM.
  • Open a terminal on the host PC and access the location you’ve put the image file and input “sudo ./uuu uuu.auto” ; you will see “Wait for known USB Device Appear”

Yocto-1.2.5.png

  • Connect the Micro USB to the EBOX-IMX8MM, and it will trigger the serial download mode to restore the image from the host PC.
  • After the restore process is done, it will show on the host PC as the image below:

Yocto-1.2.7.png

  • Remove the USB to Micro USB cable on the EBOX-IMX8MM (Power off), and set the SW1 to Internal boot as below.

  • Power on the EBOX-IMX8MM and you can see the Yocto Linux booting.

1-2-11.png


Restore the Yocto Linux via Win10 host PC to the EBOX-IMX8MM.

Tools you need before restoring the image to the eMMC:

  • A Windows 10 host O/S on a PC (The virtual machine is not suggested to be used)
  • USB cable to connect between the host PC and EBOX-IMX8MM.(Ex: USB to micro USB)

Write the image to the eMMC on the EBOX-IMX8MM.

This section will introduce how to write the image to the eMMC on the EBOX-IMX8MM step by step.

  • Find the SW1 on the EBOX-IMX8MM and change the setting to Serial Download Mode according to the photo below:

  • Turn on the host PC and unzip the image file to it.
  • Connect the USB to micro USB cable to the host PC, but not connect to EBOX-IMX8MM.
  • Open a terminal on the host PC and access the location you’ve put the image file and input “uuu.exe uuu.auto” , and you will see “Wait for known USB Device Appear”.

Yocto-2.2.4.png

  • Connect the Micro USB to the EBOX-IMX8MM, and it will trigger the serial download mode to restore the image from the host PC.
  • After the restore process is done, it will show on the host PC as the image below:

Yocto-2.2.6.png

  • Remove the USB to Micro USB cable on the EBOX-IMX8MM (Power off), and set the SW1 to Internal boot as below.

  • Power on the EBOX-IMX8MM and you can see the Yocto Linux booting.

1-2-11.png


Retrieved from "https://wiki.icop.com.tw/product/index.php?title=How_to_Restore_Yocto_Linux_to_the_eMMC_on_NX8MM-35&oldid=1700"