Personal tools

Difference between revisions of "Recipe for building Yocto Linux for EBOX-IMX8MMINI"

From ICOP tech wiki

Jump to: navigation, search
 
(24 intermediate revisions by 2 users not shown)
Line 1: Line 1:
 
=Recipe for building Yocto Linux for EBOX-IMX8MM=
 
=Recipe for building Yocto Linux for EBOX-IMX8MM=
 +
__FORCETOC__
  
 +
<br />
 +
'''Recipe for building Yocto Linux for EBOX-IMX8MM:'''
  
−
Recipe for building Yocto Linux for EBOX-IMX8MM:
+
https://ftp.icop.com.tw/share/sHDb9k1X
  
−
[./Ftp://sbc:sbc%40ftp.icop.com.tw/iMX8/OS/Yocto/Recipe/EBOX-IMX8MM%20Yocto%20Recipe.zip ftp://sbc:sbc@ftp.icop.com.tw/iMX8/OS/Yocto/Recipe/EBOX-IMX8MM%20Yocto%20Recipe.zip]
 
  
 +
'''Check the compiling method on the open document form NXP:'''
  
−
Check the compiling method on the open document form NXP:
+
https://ftp.icop.com.tw/share/2sMizj-p<br />
 +
<br />
  
−
<nowiki>https://www.nxp.com/docs/en/user-guide/IMXLXYOCTOUG.pdf</nowiki>
+
<big>'''Suggest O/S''':Ubuntu 18.04 or later.</big>
  
−
 
+
Please comment out content to the local.conf to avoid the error during building the SDL.
−
'''Suggest O/S''': Ubuntu 18.04 or later.
+
<pre>
−
 
+
#PACKAGECONFIG_append_pn-qemu-native = " sdl"
−
For Ubuntu 16.04 user, please add the content to the local.conf to avoid the error during building the SDL.
+
#PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl"
−
<code><nowiki>#</nowiki>PACKAGECONFIG_append_pn-qemu-native = " sdl"</code>
+
</pre><big>'''Storage:''' Please make sure the capacity of your storage has 120GB or bigger space</big>
−
 
+
<big>'''RAM:''' Please make sure the physical memory + swap has 16GB or bigger capacity.</big><br />
−
<code>#PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl"</code>
+
==<big>Procedure</big>==
−
 
+
'''Step 1.''' Install Host packages:
−
 
 
−
'''Storage:''' Please make sure the capacity of your storage has 120GB or bigger space.
 
−
 
 
−
 
 
−
Step 1. Install Host packages:
 
  
 
Essential Yocto Project host packages:
 
Essential Yocto Project host packages:
 +
<pre>
 +
$ sudo apt-get install gawk wget git-core diffstat unzip texinfo gcc-multilib \
 +
build-essential chrpath socat libsdl1.2-dev
 +
</pre>
 +
 +
i.MX layers host packages for a Ubuntu 12.04 or 14.04 host setup are:<pre>
 +
$ sudo apt-get install libsdl1.2-dev xterm sed cvs subversion coreutils texi2html \
 +
docbook-utils python-pysqlite2 help2man make gcc g++ desktop-file-utils \
 +
libgl1-mesa-dev libglu1-mesa-dev mercurial autoconf automake groff curl lzop asciidoc
 +
</pre>
  
−
$ sudo apt-get install gawk wget git-core diffstat unzip texinfo gcc-multilib \ build-essential chrpath socat libsdl1.2-dev
 
  
 +
'''Step 2.''' Insalling the repo utility:
  
−
i.MX layers host packages for a Ubuntu 12.04 or 14.04 host setup are:
+
Create the bin folder in the home directory:
 +
<pre>
 +
$ mkdir ~/bin (this step may not be needed if the bin folder already exists)
 +
$ curl <nowiki>https://storage.googleapis.com/git-repo-downloads/repo</nowiki> > ~/bin/repo
 +
$ chmod a+x ~/bin/repo
 +
</pre>
  
−
$ sudo apt-get install libsdl1.2-dev xterm sed cvs subversion coreutils texi2html \ docbook-utils python-pysqlite2 help2man make gcc g++ desktop-file-utils \ libgl1-mesa-dev libglu1-mesa-dev mercurial autoconf automake groff curl lzop asciidoc
 
  
 +
'''Step 3.''' Add the following line to the .bashrc file to make sure the ~/bin folder is in the PATH.
 +
<pre>
 +
export PATH=~/bin:$PATH
 +
</pre>
  
  
−
Step 2. Insalling the repo utility:
+
'''Step 4.''' Ensure the git is properly set up by commands below:
 +
<pre>
 +
$ git config --global user.name "Your Name"
 +
$ git config --global user.email "Your Email"
 +
$ git config --list
 +
</pre>
  
−
Create the bin folder in the home directory:
 
  
−
$ mkdir ~/bin (this step may not be needed if the bin folder already exists)
+
'''Step 5.''' Download the i.MX Yocto Project Community BSP recipe layers:
 +
<pre>
 +
$ mkdir imx-yocto-bsp
 +
$ cd imx-yocto-bsp
 +
$ repo init -u https://github.com/nxp-imx/imx-manifest -b \
 +
imx-linux-sumo -m imx-4.14.98-2.0.0_ga.xml
 +
$ repo sync
 +
</pre>
  
−
$ curl <nowiki>https://storage.googleapis.com/git-repo-downloads/repo</nowiki> > ~/bin/repo
 
  
−
$ chmod a+x ~/bin/repo
+
'''Step 6.''' Unzip the Recipe for building Yocto Linux for EBOX-IMX8MM to the file ‘imx-yocto-bsp”
  
  
−
Step 3. Add the following line to the .bashrc file to make sure the ~/bin folder is in the PATH.
+
'''Step 7.''' Create the setup environment by command below (You could change the file name as you want)
 +
<pre>
 +
$ DISTRO=fsl-imx-xwayland MACHINE=dm395b source fsl-setup-release.sh -b \
 +
build-dmp
 +
</pre>
  
−
export PATH=~/bin:$PATH
+
Please input “y” when the EULA confirmation pop out.
  
  
−
Step 4. Ensure the git is properly set up by commands below:
+
'''Step 8.''' Edit conf/local.conf file and add the content below at the bottom:
 +
<pre>
 +
CORE_IMAGE_EXTRA_INSTALL += "chromium-ozone-wayland"
 +
IMAGE_INSTALL_append += " \
 +
    openssh-sftp-server \
 +
    ppp \
 +
    rng-tools \
 +
    glibc-gconv-utf-16 \
 +
    expand-rootfs \
 +
"
 +
</pre>
  
−
$ git config --global user.name "Your Name"
 
  
−
$ git config --global user.email "Your Email"  
+
'''Step 9.''' Edit conf/bblayers.conf file and add the content below at the bottom:
 +
<pre>
 +
BBLAYERS += " ${BSPDIR}/sources/meta-custom-dmp "
 +
</pre>
  
−
$ git config –list
 
  
 +
'''Step 10.''' Run the command below.
 +
<pre>
 +
$ bitbake fsl-image-qt5-validation-imx
 +
</pre>
  
−
Step 5. Download the i.MX Yocto Project Community BSP recipe layers:
 
−
 
−
$ mkdir imx-yocto-bsp
 
−
 
−
$ cd imx-yocto-bsp
 
−
 
−
$ repo init -u <nowiki>https://source.codeaurora.org/external/imx/imx-manifest</nowiki> -b imx-linux-sumo - m imx-4.14.98-2.0.0_ga.xml
 
−
 
−
$ repo sync
 
  
 +
The system will start to download and install source code, patch file, and compilation.
  
−
Step 6. Unzip the Recipe for building Yocto Linux for EBOX-IMX8MM to the file ‘imx-yocto-bsp”
+
=How to install the image file by UUU.=
 +
After implemented bitbake fsl-image-qt5-validation-imx, it will generate an image file and be stored in the file under build-dmp/tmp/deploy/images/dm395b.
  
 +
<br />In the build-dmp/tmp/deploy/images/dm395b file, we’ll need the file below for the image restoration.
 +
<pre>
 +
1. fsl-mage-qt5-validation-imx-dm395b.sdcard.bz2
 +
2. imx-boot-dm395b-sd.bin-flash_evk
 +
</pre>
  
−
Step 7. Create the setup environment by command below (You could change the file name as you want)
 
  
−
$ source setup-environment build-filename
+
Input command to get the image file - fsl-mage-qt5-validation-imx-dm395b.sdcard
  
 +
(In this file, there are packaged kernel and rootfs):<pre>
 +
$ bzip2 -d fsl-mage-qt5-validation-imx-dm395b.sdcard.bz2
 +
</pre>Download the UUU.auto sample: https://ftp.icop.com.tw/share/B0eWDCzR
  
−
Step 8. Run the command below.
 
  
−
$ bitbake fsl-image-qt5-validation-imx”
 
  
 +
If you have requirement to change the file name, please follow the steps below to change your file name (You could choose not changing the file name.)<pre>
 +
SDP: boot -f XXX.bin-flash_evk
 +
SDPU: write -f XXX.bin-flash_evk -offset 0x57c00
 +
SDPS: boot -f XXX.bin-flash_evk
 +
SDPV write -f XXX.bin-flash_evk -skipspl
 +
FB: flash bootloader XXX.bin-flash_evk
 +
XXX.bin-flash_evk = imx-boot-dm395b-sd.bin-flash_evk 
  
−
The system will start to download and install source code, patch file, and compilation.
+
FB: flash -raw2sparse all XXX.image 
 +
XXX.image = fsl-mage-qt5-validation-imx-dm395b.sdcard
 +
</pre>After you have set your own file name, you could input the command below to install the Yocto Linux<pre>
 +
uuu uuu.auto
 +
</pre>

Latest revision as of 10:47, 24 May 2023

Recipe for building Yocto Linux for EBOX-IMX8MM


Recipe for building Yocto Linux for EBOX-IMX8MM:

https://ftp.icop.com.tw/share/sHDb9k1X


Check the compiling method on the open document form NXP:

https://ftp.icop.com.tw/share/2sMizj-p

Suggest O/S:Ubuntu 18.04 or later.

Please comment out content to the local.conf to avoid the error during building the SDL. 

#PACKAGECONFIG_append_pn-qemu-native = " sdl"
#PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl"

Storage: Please make sure the capacity of your storage has 120GB or bigger space

RAM: Please make sure the physical memory + swap has 16GB or bigger capacity.

Procedure

Step 1. Install Host packages:

Essential Yocto Project host packages: 

$ sudo apt-get install gawk wget git-core diffstat unzip texinfo gcc-multilib \ 
build-essential chrpath socat libsdl1.2-dev

i.MX layers host packages for a Ubuntu 12.04 or 14.04 host setup are:

$ sudo apt-get install libsdl1.2-dev xterm sed cvs subversion coreutils texi2html \
docbook-utils python-pysqlite2 help2man make gcc g++ desktop-file-utils \ 
libgl1-mesa-dev libglu1-mesa-dev mercurial autoconf automake groff curl lzop asciidoc


Step 2. Insalling the repo utility:

Create the bin folder in the home directory: 

$ mkdir ~/bin (this step may not be needed if the bin folder already exists)
$ curl https://storage.googleapis.com/git-repo-downloads/repo > ~/bin/repo 
$ chmod a+x ~/bin/repo


Step 3. Add the following line to the .bashrc file to make sure the ~/bin folder is in the PATH. 

export PATH=~/bin:$PATH


Step 4. Ensure the git is properly set up by commands below: 

$ git config --global user.name "Your Name" 
$ git config --global user.email "Your Email" 
$ git config --list


Step 5. Download the i.MX Yocto Project Community BSP recipe layers: 

$ mkdir imx-yocto-bsp 
$ cd imx-yocto-bsp 
$ repo init -u https://github.com/nxp-imx/imx-manifest -b \
imx-linux-sumo -m imx-4.14.98-2.0.0_ga.xml
$ repo sync


Step 6. Unzip the Recipe for building Yocto Linux for EBOX-IMX8MM to the file ‘imx-yocto-bsp”


Step 7. Create the setup environment by command below (You could change the file name as you want) 

$ DISTRO=fsl-imx-xwayland MACHINE=dm395b source fsl-setup-release.sh -b \ 
build-dmp

Please input “y” when the EULA confirmation pop out.


Step 8. Edit conf/local.conf file and add the content below at the bottom: 

CORE_IMAGE_EXTRA_INSTALL += "chromium-ozone-wayland"
IMAGE_INSTALL_append += " \
    openssh-sftp-server \
    ppp \
    rng-tools \
    glibc-gconv-utf-16 \
    expand-rootfs \
"


Step 9. Edit conf/bblayers.conf file and add the content below at the bottom: 

BBLAYERS += " ${BSPDIR}/sources/meta-custom-dmp "


Step 10. Run the command below. 

$ bitbake fsl-image-qt5-validation-imx


The system will start to download and install source code, patch file, and compilation.

How to install the image file by UUU.

After implemented bitbake fsl-image-qt5-validation-imx, it will generate an image file and be stored in the file under build-dmp/tmp/deploy/images/dm395b.


In the build-dmp/tmp/deploy/images/dm395b file, we’ll need the file below for the image restoration. 

1. fsl-mage-qt5-validation-imx-dm395b.sdcard.bz2
2. imx-boot-dm395b-sd.bin-flash_evk


Input command to get the image file - fsl-mage-qt5-validation-imx-dm395b.sdcard

(In this file, there are packaged kernel and rootfs):

$ bzip2 -d fsl-mage-qt5-validation-imx-dm395b.sdcard.bz2

Download the UUU.auto sample: https://ftp.icop.com.tw/share/B0eWDCzR


If you have requirement to change the file name, please follow the steps below to change your file name (You could choose not changing the file name.)

SDP: boot -f XXX.bin-flash_evk
SDPU: write -f XXX.bin-flash_evk -offset 0x57c00
SDPS: boot -f XXX.bin-flash_evk
SDPV write -f XXX.bin-flash_evk -skipspl
FB: flash bootloader XXX.bin-flash_evk 
XXX.bin-flash_evk = imx-boot-dm395b-sd.bin-flash_evk  

FB: flash -raw2sparse all XXX.image  
XXX.image = fsl-mage-qt5-validation-imx-dm395b.sdcard

After you have set your own file name, you could input the command below to install the Yocto Linux

uuu uuu.auto
Retrieved from "https://wiki.icop.com.tw/product/index.php?title=Recipe_for_building_Yocto_Linux_for_EBOX-IMX8MMINI&oldid=2005"