How to Restore Android10 OS to the eMMC on PN8M-090T
From ICOP tech wiki
How to Restore Android10 OS to the eMMC on PN8M-090T
Contents
Restore the Android 10 OS via Linux host PC to the PN8M-090T
Tools you need before restoring the image to the eMMC:
- PN8M-090T-2GB-B/VOX-090T-N8M-2GB-B RAM image:https://ftp.icop.com.tw/share/mgeJPeSe
- PN8M-090T-2GB RAM-C/VOX-090T-N8M-2GB-C (WM8962) image: https://ftp.icop.com.tw/share/-uMUh49o
- PN8M-090T-4GB/VOX-090T-N8M-4GB-C RAM-B image: https://ftp.icop.com.tw/share/twlj09Ai
- VOX-070-TS-N8M-2GB-B image: https://ftp.icop.com.tw/share/ANpATm6T
- VOX-070-TS-N8M-2GB-C (WM8962) image:https://ftp.icop.com.tw/share/9cRsmFXa
- UUU software: https://github.com/nxp-imx/mfgtools/releases
- Download uuu and uuu.exe and put it to the image folder.
- A 64-bit Linux host O/S on a PC (The virtual machine is not suggested to be used)
- USB cable CABLE-MINIDIN8P-30 to connect between the host PC and the PN8M-090T.
Write the image to the eMMC on the PN8M-090T.
This section will introduce how to write the image to the eMMC on the PN8M-090T step by step.
- Find the SW1 and SW2 on the PN8M-090T and change the setting to Serial Download(developer) Mode according to the photo below:
- Turn on the host PC and unzip the image file in it.
- Connect the USB on CABLE-MINIDIN8P-30 to the host PC, but not connect to the PN8M-090T.
- Open a terminal on the host PC and access the location you’ve put the image file and input "sudo chmod a+x uuu" to enable uuu as executable command.
- Input “sudo ./ uuu 16lst” ; you will see “Wait for known USB Device Appear”.
Installation command for different eMMC capacity: 16.lst --> 16GB version
- Connect the CABLE-MINIDIN8P-30 to the PN8M-090T, and it will trigger the serial download mode to restore the image from the host PC.
- Wait until the restore process is done, remove the CABLE-MINIDIN8P-30 on the PN8M-090T, and set the SW1 and SW2 as the photo below
- Power on the PN8M-090T and you can see the Android 10 booting.
Restore the Android 10 OS via Win10 host PC to the PN8M-090T
Tools you need before restoring the image to the eMMC:
- Recovery image(2GB RAM):https://ftp.icop.com.tw/share/mgeJPeSe
- UUU software: https://github.com/nxp-imx/mfgtools/releases
- A Windows 10 host O/S on a PC (The virtual machine is not suggested to be used)
- USB cable CABLE-MINIDIN8P-30 to connect between the host PC and the PN8M-090T.
Write the image to the eMMC on the PN8M-090T.
This section will introduce how to write the image to the eMMC on the PN8M-090T step by step.
- Find the SW1 and SW2 on the PN8M-090T and change the setting to Serial Download(developer) Mode according to the photo below:
- Turn on the host PC and unzip the image file to it.
- Connect the USB on CABLE-MINIDIN8P-30 to the host PC, but not connect to the PN8M-090T.
- Open a terminal with administration right on the host PC and access the location you’ve put the image file and input “.\uuu.exe 16.lst” , and you will see “Wait for known USB Device Appear”.
Installation command for different eMMC capacity: 16.lst --> 16GB version
- Connect the CABLE-MINIDIN8P-30 to the PN8M-090T, and it will trigger the serial download mode to restore the image from the host PC.
- Wait until the restore process is done, remove the CABLE-MINIDIN8P-30 on the PN8M-090T, and set the SW1 and SW2 as the photo below
- Power on the PN8M-090T and you can see the Android booting.
